Journal Articles

Disclaimer: The papers below are intended for private viewing by the page owner or those who otherwise have legitimate access to them. No part of it may in any form or by any electronic, mechanical, photocopying, recording, or any other means be reproduced, stored in a retrieval system or be broadcast or transmitted without the prior permission of the respective publishers. If your organization has a valid subscription of the journals, click on the DOI link for the legitimate copy of the papers.

[29] Wassan Rano Khan, Shaikh Shakeel Ahmed, Marri Hussain Bux, Memon Muhammad Saad, Shah Syed Feroz

Analyzing the impact of GLSS implementation over sustainability in Pakistani SMEs , Benchmarking: An International Journal, Vol. ahead-of-print , No. ahead-of-print , pp.

DOI: https://doi.org/10.1108/BIJ-05-2022-0338

[28] Asif Nawaz Wassan, Muhammad Saad Memon, Sonia Irshad Mari, Muhammad Ahmed Kalwar

Identifying the critical success factors of total quality management implementation in manufacturing industry of Pakistan: an exploratory factor analysis , Journal of Applied Research in Technology & Engineering, Vol. 04 , No. 01 , pp. 37-53.

DOI: https://doi.org/10.4995/jarte.2023.17969

[27] Asif Nawaz Wassan, Muhammad Saad Memon, Sonia Irshad Mari, Muhammad Ahmed Kalwar

Impact of total quality management (TQM) practices on sustainability and organisational performance , Journal of Applied Research in Technology & Engineering, Vol. 03 , No. 02 , pp. 93-102.

DOI: https://doi.org/10.4995/jarte.2022.17408

[26] Sardar Shaheen, Mohsin Muhammad, Memon Muhammad Saad, Ramzan Babar, Sharif Rabia

An empirical study regarding the environmental sustainability practices in the textile industry , industria textila, Vol. 73 , No. 04 , pp. 384-396.

[25] Rano Khan Wassan; Shakeel Ahmed Shaikh; Imran Khan Shaikh; Muhammad Saad Memon; Abdul Rahman; Syed Feroz Shah

Initial screening of critical success factors for green, lean and six sigma implementation in Pakistani small and medium enterprises , Journal of Applied Engineering Science, Vol. 20 , No. 03 , pp. 946-956.

DOI: DOI:10.5937/jaes0-36162

[24] Muhammad Ahmed Kalwar; Muhammad Saad Memon; Muhammad Ali Khan; Anwaruddin Tanwari

Statistical analysis of waiting time of patients by queuing techniques: case study of large hospital in Pakistan , Journal of Applied Research in Technology & Engineering, Vol. 2 , No. 2, pp. 1-15.PDF

DOI: 10.4995/jarte.2021.14741

[23] Ali, Muhammad; Qureshi, Sheheryar; Mari, Sonia; Memon, Saad; Ramzan, Babar (2021),

Competency Framework Development for Effective Human Resource Management , Sage Open, Vol. 2 , No. 10, pp. 1-15.PDF

DOI: 10.1177%2F21582440211006124

[22] Siddiqui Midhat Ali, Qureshi Sheheryar Mohsin, Mari Sonia Irshad, Memon Muhammad Saad, and Ramzan Muhammad Babar (2021),

Competency Framework Validation: Application in Textile Industry , Industria Textila Journal, Vol. 72 , No. 5, 2021.

[21] Farhan Khowaja, Dr. Tauha Hussain Ali , Dr. Muhammad Saad Memon , Shahzaib Jamil ,

Occupational Stress Of Civil Engineers In The Pakistani Construction Industry , International Research Journal of Modernization in Engineering Technology and Science, Vol. 2 , No. 10, pp. 222-226.PDF

[20] Dahri, T. H., Ali, T. H., & Memon, M. S. (2020),

Compensation Practices in Construction Industry: A Human Resource Management Perspective of Construction Projects in Sindh, Pakistan , International Research Journal of Modernization in Engineering Technology and Science, Vol. 2 , No. 10, pp. 824-831.PDF

[19] Kalwar, M.A, Mari, S.I, Memon, M.S, Tanwari, A, Siddiqui, A, A. (2020),

Simulation Optimization Based Approach for Improving Outpatient Clinic Operations , Mehran University Research Journal of Engineering and Technology, Vol. 39 No. 1, pp. 153-170.PDF

DOI: 10.22581/muet1982.2001.15

[18] Panhwer, Pireh and Pitafi, Adnan and Memon, Muhammad Saad and Memon, Anum (2020),

Awareness and Reason towards Slow Adoption of E-Payment System: Study of Hyderabad , Annals of Contemporary Developments in Management & HR., Vol. 2 , No. 1, pp. 6-21, PDF

DOI: 10.33166/ACDMHR.2020.01.002

[17] Bai, K., Memon, M. S., & Mari, S. I. (2020),

Analyzing the Consumers Buying Behavior towards Green Products , International Journal of Engineering Works, Vol. 7 , No. 3, pp.161-167PDF

DOI: 10.34259/ijew.20.703161167

[16] Babar Ramzan, M., Mohsin Qureshi, S., Irshad Mari, S., Saad Memon, M., Mittal, M., Imran, M., & Waqas Iqbal, M. (2019).,

Effect of Time-Varying Factors on Optimal Combination of Quality Inspectors for Offline Inspection Station , Mathematics, Vol. 7 No. 1, 51.PDF

DOI: 10.3390/math7010051

[15] Mari, S.I.; Memon, M.S.; Ramzan, M.B.; Qureshi, S.M.; Iqbal, M.W. (2019),

Interactive Fuzzy Multi Criteria Decision Making Approach for Supplier Selection and Order Allocation in a Resilient Supply Chain , Mathematics, Vol. 7 No. 2, 137.PDF

DOI: 10.3390/math7020137

[14] Aziz Ahmed, Shakeel Shaikh, Muhammad Saad Memon (2019).,

Implementation and Effectiveness of six sigma by using DMAIC approach in Pharmaceutical Industry , International Journal of Modern Research in Engineering and Management, Vol. 6 , No. 2, pp. 1-7PDF

[13] Kokab, Q., Mari, S., Bhatti, S., & Memon, M. S (2019).,

Exploratory and Conformity Factor Analysis of the Green logistics practices in Textile Sector of Pakistan , Sindh University Research Journal-SURJ (Science Series), Vol. 51 , No. 2, pp. 285-290.PDF

[12] Memon, M.S, Mari, S. I, Shaikh, F., and Shaikh, S. A. (2018).

A Grey-Fuzzy Multiobjective Model for Supplier Selection and Production-Distribution Planning Considering Consumer Safety , Mathematical Problems in Engineering, Vol. 2018 , Article ID 5259876. PDF

DOI: 10.1155/2018/5259876

[11] Memon, M.S, Mari, S. I, Shaikh, W.A, (2018),

Interpretive Structural Modeling Based Approach for Sustainable Supplier Evaluation and Selection in Textile Supply Chains , International Journal of Science and Engineering Investigations, Vol. 7 , No. 83, pp. 113-120.PDF

[10] M.B. Ramzan, S.M. Qureshi, M. Ullah, M.S. Memon and M.A. Siddiqui (2017).,

Assessment of the Extent of Implementation of Quality Management System (QMS) and Cost of Quality (COQ) Concepts – A Case from a Developing Country , The Journal of Engineering Research, Vol. 14 , No. 2, pp. 145-155.PDF

[9] Habib, M.S., Lee, Y. H., & Memon, M. S. (2016).,

Mathematical Models in Humanitarian Supply Chain Management: A Systematic Literature Review , Mathematical Problems in Engineering, Vol. 2016 , Article ID 3212095.PDF

DOI: 10.1155/2016/3212095.

[8] Sardar, S., Lee, Y. H., & Memon, M. S. (2016).,

Sustainable Outsourcing Strategy with Cost, Capacity Flexibility, and Risk in Textile Supply Chain , Sustainability, Vol. 3 , No. 3, Article No. 234.PDF

DOI: 10.3390/su8030234

[7] Sardar, S., Lee, Y. H., & Memon, M. S. (2016).,

Multi-Objective Outsourcing Strategies for Functional and Fast Fashion Products in Textile Supply Chain , International Journal of Engineering and Technology, Vol. 8 , No. 2, pp. 870-886.PDF

[6] Mari, S. I., Lee, Y. H., & Memon, M. S.,

Sustainable and Resilient Garment Supply Chain Network Design with Fuzzy Multi-Objective under Uncertainty , Sustainability, 2016, Vol 8 , No 10.PDF

DOI: 10.3390/su8101038.

[5] Mari, S.I, Lee, Y., Memon, M.S, Park, Y., & Kim, M.,

Adaptivity of Complex Network Topologies for Designing Resilient Supply Chain Network , International Journal of Industrial Engineering: Theory, Applications and Practice, 2015, Vol. 22 No. 1, pp. 102-116.

DOI: ijie/article/view/1326

[4] Mari, S. I., Lee, Y. H., & Memon, M. S.,

Complex network theory-based approach for designing resilient supply chain networks , International Journal of Logistics Systems and Management, 2015 Vol. 21 No. 3, pp. 365-384.

DOI: 10.1504/IJLSM.2015.069733

[3] Memon, M. S., Lee, Y. H., & Mari, S. I.,

Memon, M. S., Lee, Y. H., & Mari, S. I. (2015). Group multi-criteria supplier selection using combined grey systems theory and uncertainty theory , Expert Systems with Applications, 2015, Vol. 42 No. 21, pp. 7951-7959.

DOI: https://doi.org/10.1016/j.eswa.2015.06.018

[2] Memon, M. S., Lee, Y. H., & Mari, S. I.,

Analysis of Traceability Optimization and Shareholder’s Profit for Efficient Supply Chain Operation under Product Recall Crisis , Mathematical Problems in Engineering, 2015, Vol. 2015 , Article ID 896239.PDF

DOI: https://doi.org/10.1155/2015/896239

[1] Mari, S. I., Lee, Y. H., & Memon, M. S.,

Sustainable and Resilient Supply Chain Network Design under Disruption Risks , Sustainability, 2014, Vol. 6 No. 10, pp. 6666-6686.PDF

DOI: https://doi.org/10.3390/su6106666

Latest Events

2021 Students Reunion